Which type of OEL do you believe would be the most protective for workers?

Which type of OEL do you believe would be the most protective for workers?

> UNIT V JOURNAL
>
> Instructions
>
> Several organizations publish occupational exposure limits (OELs) including the Occupational Safety and Health Administration’s (OSHA) permissible exposure limits (PELs), the American Conference of Governmental Industrial Hygienists’ (ACGIH) threshold limit values (TLVs), and the National Institute for Occupational Safety and Health’s (NIOSH) recommended exposure limits (RELs). Only OSHA’s PELs are legally enforceable.
>
> Review each type of OEL, and reflect on the pros and cons of each. Which type of OEL do you believe would be the most protective for workers? Explain why.
>
>
>
>
> UNIT V SCHOLARLY ACTIVITY
> Weight: 10% of course grade
> Grading Rubric
> Instructions
>
> This assignment has two parts. Both parts will be combined and submitted within the same document. For this assignment, begin by analyzing the items in the table below and then answering the associated questions.
>
> Hazard
> Occupational Exposure Limits (OEL)s
> Manganese Fume
> 5 mg/m3 (OSHA Ceiling )
> 0.1 mg/m3 (ACGIH 8-hour TWA (I))
> Copper Fume
> 0.1 mg/m3 (OSHA 8-hour TWA)
> 0.2 mg/m3 (ACGIH 8-hour TWA)
> Lead Fume
> 0.05 mg/m3 (OSHA 8-hour TWA)
> 0.05 mg/m3 (ACGIH 8-hour TWA
> 1,2,4 trimethylbenzene
> OSHA – None Established
> 25 ppm (ACGIH 8-hour TWA TLV)
> Toluene
> 200 ppm (OSHA 8-hour TWA)
> 300 ppm (OSHA Ceiling)
> 20 ppm (ACGIH 8-hour TWA TLV)
> Xylene
> 100 ppm (OSHA 8-hour TWA)
> 100 ppm (ACGIH 8-hour TWA
> Metal Working Fluids
> OSHA – None Established
> 0.5 mg/m3 (NIOSH 10-hour TWA REL)
>
> Part I: For each of the chemical hazards answer the following:
>
> Compare your calculated exposures in Unit IV to one of the occupational exposure limits (OELs) in the table.
> Does the calculated exposure exceed the OEL you chose?
> Discuss why you chose the OELs you used.
> Provide your opinion as to whether the risk associated with each exposure is an acceptable level of risk.
>
> Part II: Analyze the table below, and then answer the associated questions.
>
> Location
> Shift Length
> Result
> Shipping/Receiving
> 8 hours
> 78.3 dBA (Lavg)
> Hydraulic Press
> 12 hours
> 93.0 dBA (Lavg)
> Metal Working Line
> 12 hours
> 84 dBA (Lavg)
> Robotic Welding
> 12 hours
> 80.5 dBA (Lavg)
> Hand Welding
> 12 hours
> 81.3 dBA (Lavg)
> Paint Booth
> 12 hours
> 79.5 dBA (Lavg)
> QA/QC Laboratory
> 8 hours
> 70.0 dBA (Lavg)
> Final Inspection
> 8 hours
> 73.5 dBA (Lavg)
>
> Answer each of the following:
>
> Which of the results exceed the OSHA PEL?
> Which of the results exceed the OSHA action level?
> Provide your opinion as to whether the risk associated with each exposure is an acceptable level of risk.
>
> Your assignment must be a minimum of two pages in length, not including title or reference pages. Your assignment must use at least two references. One must be gathered from the CSU Online Library; the other may be your textbook. All references and in-text citations must be formatted according to APA standards

 

Image preview for which type of OEL do you believe would be the most protective for workers?

Which type of OEL do you believe would be the most protective for workers

APA

622 words

Open chat
Hello
Contact us here via WhatsApp